We can supply your Blum Hinges and drill the pockets too!
We can drill the hinge cups in your cabinet doors and supply top-quality, Blum Concealed Hinges too. These Top-of-the-Line Blum Hinges are soft-closing and the "Clip Top" feature allows installation without tools.
Most hardware stores don't even carry quality, American-made hinges.
We supply the hinges for $16.60 per pair, or we'll supply the hinges AND drill the cups for $22.60 per door.
We buy these hinges in 10,000 piece lots and pass the savings on to you.
These Hinges are top quality, soft-closing, American made, Blum Inserta Clip-Top, 120 degree, All-metal, nickel plated Hinges.
Blum part number 71T5590B. The hinges do not require screws and are simply placed in the hinge pockets and the locking clip is then closed.
These hinges are now used by most high-end cabinet makers across the country.
We'll also include the Face-frame adapter plate (Blum part number 175L6030.21). Mounting this adaptor plate does require #7 wood screws (Screw length dependent on your face-frame, so the screws are not supplied).
Adapter plate is for Face-frame cabinets with 1/2" overlay.
If you order Hinge Boring, your doors will have 35mm pocket-holes (approximately 1/2" deep) bored in the back of the doors 3 inches from the bottom and top. Doors 14" in height and less will have the holes bored 1 1/2" from the bottom and top of the door.
If you wish, doors over 48" tall may have three hinge cups bored, with the third hinge in the door center point (3 hinges are recommended for doors over 48" in height).
The Blum Inserta Hinges are priced at $8.30 each ($16.60 per pair) with the boring priced at $3.00 per cup ($6.00 per door).
The hinge boring and/or the hinge purchase options are selected from the drop-down menus on the door order page for each door style.
When selected, the hinge boring charge and/or the hinge purchase charge will automatically add to the door ordered, and the itemized charge will show on your shopping cart.